Jøtul F 500 ECO UKCA Installation And Operating Instructions Manual page 15

7.3 Replacing the burn plates
Fig. 20a Replacing the rear burn plate
1. Loosen the rear burn plate by unscrewing the screws as shown
in the fi gure. The screws are continuous and have nuts on the
back of the stove. (see fi g.20b)
Fig. 20b
Fig. 20c
2. Edge the rear burn plate out of the stove.
3. When refi tting, follow the same procedure in reverse order.
(fi rst see fi g. 21 (insulation mats))
Fig. 21 Replacing the insulation mats
A
4. Behind the rear burn plate there are 5 insulation mats. They
must be replaced when replacing the rear burn plate. Lay
the new rear burn plate on a suitable surface and place the
insulation mats as shown in the fi gure. NB: It is important
that the insulation mats are placed according to the fi gure,
as there are diff erent thickness of the mats. Insulation mat
A = 19mm thick (2 pieces), B = 25mm thick (3 pieces).
ENGLISH
B
15