Installing The Switch In A Rack; Connecting Devices To The Switch; Figure 4-1. Attaching Mounting Brackets - NETGEAR GS508T Installation Manual

Installing the Switch in a Rack

Refer to Figure 4-1 when installing the switch in a rack.
100/10 00 Mbps
Copp
er Giga bit Switc
h
Powe
r

Figure 4-1. Attaching Mounting Brackets

Connecting Devices to the Switch

To connect the switch:
1. Connect the devices to the network ports on the switch, using Category 5 (Cat5)
or Category 5e (Cat5e) UTP cable.
Note: Ethernet specifications limit the cable length between your PC or
server and the switch to 100 m.
2. Connect one end of the AC power adapter cable to the power outlet on the
rear panel of the switch and the other end of the power adapter cable to
the wall outlet.
Refer to Figure 4-2 when connecting the switch.
installation 4-2
Ethe rnet
MODE L GS 504
T
9378FB