Service And Maintenance; Damage Requiring Service; Safe Disposal - Ametek CREAFORM peel 3 User Manual

Service and Maintenance

Damage requiring service

Disconnect the scanner from the wall outlet and computer.
Refer to Creaform Customer Support under the following conditions:
The power cord or the plug is damaged.
Liquid has been spilled on the scanner.
The scanner has been exposed to rain or water.
The scanner has been dropped and is damaged or does not work properly.
Any other circumstance that may require the intervention of qualified personnel for maintenance
or repair.
See Resources for contact information.

Safe disposal

Dispose of the products (scanner, targets, accessories) and packaging appropriately in
accordance with local laws and regulations.
Contact your local authorities for any product specific treatment and waste management
information.
peel 3 User Manual version p3d-2203-001 (last update: 2022-09-13)
Page 19 of 23