Table of Contents
Advertisement
5. Cabling the Device
Item
2
3
4
5
To connect the device to the power supply using the 3-Amp power adapter:
1.
Insert the relevant AC plug into the housing power adapter:
a.
Insert the top part of the plug into the upper part of the housing slot (1).
b.
Press down on the bottom part of the plug until a "click" sound is heard, indicating that
the plug is securely inserted in the housing slot. To remove the plug, push and slide down
the OPEN plug release lever (3).
2.
Insert the DC plug (5) located at the end of the power cord (4) of the power adapter into the
device's power socket located on the rear panel.
Plug lock
Plug release lever
DC power cord
DC power plug
Figure 15: Inserting Plug into Power Adapter
- 18 -
Description
MP-504/8
Advertisement
Table of Contents
