Table of Contents
Advertisement
5. Cabling the Device
Cable specification:
Cable: Standard straight-through RJ-11 telephony cable
◼
Connector: RJ-11
◼
Connector Pinouts:
◼
To connect an FXS interface:
1.
Connect one end of an RJ-11 cable to an FXS port, located on the rear panel and labeled FXS.
2.
Connect the other end of the cable to the required telephone interface (e.g., fax machine,
dial-up modem, or analog POTS telephone).
Figure 12: RJ-11 Connector Pinouts for FXS Interfaces
Figure 13: Cabling FXS Interfaces
- 16 -
MP-504/8
Advertisement
Table of Contents
