Table of Contents
Advertisement
4. Mounting the Device
To mount the device in a 19-inch rack:
1.
Position the rack mount shelf (ordered separately from AudioCodes) in the 19-inch rack,
aligning the holes of the shelf's side brackets with the holes of the rack's front posts, as shown
in the figure below.
Make sure that you attach the shelf's side brackets (left and right) at the same height level
in the rack so that the shelf is in a horizontal position.
2.
Attach the shelf to the rack posts using four standard 19-inch rack bolts (not supplied).
3.
Place the device on the shelf so that the device's front panel faces the front of the rack and
the device's four anti-slide rubber legs (located on the bottom of the device) fit into the four
square openings on the shelf, as shown in the figure below (viewed from underneath):
Figure 4: Positioning Shelf in Rack
- 10 -
MP-504/8
Advertisement
Table of Contents
