Distech Controls Allure EC-Smart-Comfort Series Installation Manual page 12

ECB/ECL-600 With ECx-400
When ECx-4xx IO Extension Modules are installed with an ECB-600 or ECL-600 Series controller and with room device(s):
£ Only the EOL terminations on the last ECx-4xx IO Extension Module and the last room device are set to ON.
£
All other ECx-4xx IO Extension Modules and room devices must have their EOL terminations set to OFF.
ECx-4xx Series devices and room devices are factory-set with the EOL set to OFF by default.
Figure 13: Setting the EOL Terminations when Allure EC-Smart-Comfort Sensors are used with ECx-4xx IO Extension Modules
12 / 13