Advertisement
Quick Links
EC-BOS-8 with one option module
EC-BOS-8
1
Insert Card
1
1 Access Shutter
2 Card Carrier
3 MicroSD Card
DIN Mount (2)
3
5. Install module
6. Install end-clips
5
RS485 Example
IO-R-16
IO-R-16
IO-R-16
1 Port A (COM1)
2 Port B (COM2)
3 See note
2
3
IO-R-16
IO-R-16
Quick Start Guide
DIN Mount (1)
2
1 Pull down clip
2 Tilt and hook
3 Push down & in
4 Push up clip
Communications
4
WLAN
1 RS485
2 WLAN
3 Ethernet
4 Ground & power
October 9, 2017
QUICK START GUIDE
1
Advertisement
Related Manuals for Distech Controls EC-BOS-8
Summary of Contents for Distech Controls EC-BOS-8
- Page 1 October 9, 2017 QUICK START GUIDE EC-BOS-8 with one option module EC-BOS-8 Quick Start Guide Insert Card DIN Mount (1) 1 Pull down clip 1 Access Shutter 2 Tilt and hook 2 Card Carrier 3 Push down & in 3 MicroSD Card...
- Page 2 Ground & Power 50/60Hz 1 WLAN (Green) 2 RS485 “A” (COM1) 3 RS485 “B” (COM2) 4 STAT (Green) 5 BEAT (Yellow) Ground 6 Ethernet (LAN2) Power 7 Ethernet (LAN1) 2.1 AC and transformer 8 Backup (Green) 2.2 DC 2.3 AC adapter EC-Net Access Enclosure Example Ports &...
-
Page 3: Environmental Requirements
2-position power connector, and a grounding wire. 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or • This EC-BOS-8 Quick Start Guide. transmitter. Material & Tools Required Cautions: •... - Page 4 SEC (LAN2) port is disabled. access point for up to 16 clients. Refer to the EC-BOS-8 Install and Startup Guide for de- • CLT - Controller operates as a client to an existing tails on the software configuration of the Ethernet ports.
- Page 5 For details on using a The controller provides a number of status LEDs, with all serial connection to the DEBUG port, see the EC-BOS-8 but one visible with the front access door closed. Install and Startup Guide.
Need help?
Do you have a question about the EC-BOS-8 and is the answer not in the manual?
Questions and answers