Fs752Ts Front Panel - NETGEAR FS728TS Hardware Installation Manual

Hardware Installation Guide for the Prosafe Stackable Smart Switch FS700TS Series

FS752TS Front Panel

The NETGEAR FS752TS Smart Switch is a 48-Port 10/100M Stackable Smart Switch with 4
Gigabit Ports. Each RJ45 port automatically senses the line speed and negotiates duplex mode
operation with the link partner.
The following figure shows the NETGEAR FS752TS Smart Switch front panel:
Figure 2-4
1. (1a-1y) LEDs for the top row of 10/100M ports (odd-numbered ports 1-47)
2. (2a-2y) LEDs for the bottom row of 10/100M ports (even-numbered ports 2-48)
3. LED for the top-most SFP port (port 49F)
4. LED for the bottom-most SFP port (port 50F)
5. Reset button
6. Stack ID LED
7. Power LED
8. Stack Master LED
9. 24 RJ-45 connectors for 10BASE-T and 100BASE-TX (ports 1-48)
10. 2 Gigabit Interface Converter SFP slots for SFP modules (ports 49F and 50F)
11. 4 RJ-45 connectors for 10BASE-T, 100BASE-TX and 1000BASE-T (ports 49T, 50T, 51, and
52)
12. Factory Defaults button
2-8 Introduction
v1.0, December 2005