Figure 5-8. System> Ip Access List> Add New Ip - NETGEAR FS526T User Manual

Add a new entry
Click Add to bring up the page as shown in Figure 5-8
o
Enter site-specific IP address in the appropriate boxes
o
Click Apply to activate the setting
o
Note: Once this new IP access is enabled, you can only access the switch via devices with approved IP addresses. Make sure that your current PC
has one of the addresses in the list.
Delete an existing entry
Click Delete to bring up the IP Access List Delete screen
o
Click to select the entry in the list
o
Click Apply to delete this IP Access
o
Figure 5-8. System> IP Access List> Add new IP
Page 29 of 58