Factory Settings - Retevis NR10 User Manual

(2) When there are less than 2 scannable channels, the intercom cannot scan.
(3) If you do not want to enter the scan in 16 channels, please select "Scan Add" for each channel as "No".
11. Transmit time limit function
In order to prevent some users to occupy the same channel communication for a long time, users can set to
open the transmitting time limit function. When the user in the current channel continuous transmitting time
reached the set time, the intercom will stop transmitting and horn transmitting time limit beep.
The transmit time limit can be set by programming software, 30-180 seconds (default is 60 seconds) can be
selected.
12. Sub-tone code
This product supports 260 groups of sub-tone code function. 50 groups of analog sub-tone code and 105*2
groups (N phase and I phase) of digital sub-tone code can be set through the programming software.

Factory Settings

Channel Frequency(MHz)
1 462.5625
2 462.5875
3 462.6125
4 462.6375
5 462.6625
6 462.6250
7 462.7250
8 462.6875
9 462.7125
10 462.5500
11 462.5750
12 462.6000
13 462.6500
14 462.6750
15 462.7000
16 462.7250
Power(W)
2W
2W
2W
2W
2W
2W
2W
2W
2W
2W
2W
2W
2W
2W
2W
2W
04