Product Usage; Care And Cleaning - KitchenAid 5KSMFVSFGA Owner's Manual

PRODUCT ASSEMBLY (CONTINUED)
ASSEMBLING THE ATTACHMENT TO THE STAND MIXER
1.
Turn the Stand Mixer OFF (0) and unplug.
2.
For Stand Mixers with a hinged attachment hub cover: Flip up to open.
For Stand Mixers with a removable attachment hub cover: Turn the attachment knob
counterclockwise to remove attachment hub cover.
3.
Remove the attachment hub cover.
4.
Insert the attachment shaft Housing into the attachment hub.
5.
Tighten the Stand Mixer attachment hub knob until the attachment is completely secured
to the Stand Mixer.
TIP: Place the Bowl under the discharge disc or the Strainer Cone to catch ground or
strained food and place a smaller Bowl under the open end to catch food waste.

PRODUCT USAGE

GRINDING WITH THE FOOD GRINDER ATTACHMENT
Always use food pusher.
Keep fingers out of openings.
Keep away from children.
Failure to do so can result in amputation or cuts.
1.
Cut food into small strips or pieces sized to fit into the Feed Tube.
2.
Turn the Stand Mixer to Speed 4 and feed food into the Feed Tube using the Food Pusher.
USING WITH THE FRUIT/VEGETABLE STRAINER ATTACHMENT
1.
Cut food into pieces that will fit in the Feed Tube.
2.
Turn the Stand Mixer to Speed 4 and feed food into the Feed Tube using the Food Pusher.
NOTE: Liquid may appear in the hopper when processing large amounts of high moisture
foods such as tomatoes or grapes. To drain liquid, continue to operate the Stand Mixer. To
avoid damage to the Stand Mixer, do not process additional food until the liquid has
drained from the hopper.

CARE AND CLEANING

IMPORTANT: Allow the appliance to cool completely before putting on or taking off parts, and
before cleaning the appliance.
NOTE: Blades are sharp. Handle carefully.
1.
Dishwasher-safe parts, top rack only: Strainer Cone, Strainer Shield, Food Pusher,
Collar, Removable Tray, and Splash Lid.
2.
The following parts should be hand-washed only, using warm, soapy water and
drying thoroughly: Main Housing, Long Grind Screw, Grinding Plate, Blade and Shaft
Assembly.
6
WARNING
Rotating Blade Hazard