Burner And Orifice - Coleman 9930 Series Instructions For Use Manual

■ Assemble the
igniter through
the hole in the
left side of the
grill. (Fig. 3)
■ Plug the round
electrical
connector to
the round jack,
and the flat
one to the flat
jack. (Fig. 4)
Flat
■ Install grease tray into position below
the grill from the back side. (Fig. 5)
■ Install the cooking surface. (Fig. 6)
■ Install the warming rack. (Fig. 7)
■ Turn off regulator
valve. (Fig. 8)
■ Firmly snap regulator into grill. (Fig. 9)
■ Remove
protective cap
from top of
propane cylinder.
Save cap for use
Fig. 3
in storing.
(Fig. 10)
■ Screw propane
bottle into
regulator hand
Round
tight. (Fig. 11)
Fig. 4
■ Never operate
grill with propane
cylinder in an
inverted position.
(Fig. 12)
Fig. 5
Burner and Orifice
■ Proper location of the burner with
respect to the orifice is important.
To verify the proper installation of
the burner tube, remove the cooking
surface and the cooktop. The burner
tube, fuel tube, and orifice (on the
regulator) should be positioned as
shown in Fig. 13.
Fig. 6
Burner
■ Check and clean the burner/fuel
Fig. 7
tubes for insects and insect nests.
A clogged tube can lead to a fire
outside the appliance.
Fig. 8
Fig. 9
English - 6
Fig. 10
Fig. 11
Fig. 12
Orifice
Fuel Tube
Fig. 13