NETGEAR DG632 Reference Manual page 50

Reference Manual for the Model DG632 ADSL Modem Router
Table 5-1. Menu 3.2 - Modem Status Fields
Field
DHCP
IP Subnet Mask
Domain Name Server (DNS) Displays the DNS Server IP addresses being used by the modem. These
LAN Port
MAC Address
IP Address
DHCP
IP Subnet Mask
Modem
ADSL Firmware Version
Router Status
Connect Mode
Downstream Speed
Upstream Speed
VPI
VCI
5-6
Description
If None, the modem will use a fixed IP address on the ADSL.
If Client, the modem will obtain an IP address dynamically from the ISP
Displays the IP Subnet Mask being used by the Internet (ADSL) port of
the modem.
addresses are usually obtained dynamically from the ISP.
These parameters apply to the Local (ADSL) port of the modem.
Displays the Ethernet MAC address of the Local (LAN) port.
This field displays the IP address being used by the Local (LAN) port of
the modem. The default is 192.168.0.1
If OFF, the modem will not assign IP addresses to PCs on the LAN.
If ON, the modem will assign IP addresses to PCs on the LAN.
This field displays the IP Subnet Mask being used by the Local (LAN) port
of the modem. The default is 255.255.255.0.
These parameters apply to the Local (WAN) port of the modem.
The version of the firmware.
The connection status of the modem.
This field displays the protocol used to connect to your service provider.
When the ADSL link comes up, the connection will be either "Fast" or
"Interleaved", depending on the way the telephone company has
configured its equipment.
The speed at which the modem is receiving data from the ADSL line.
The speed at which the modem is transmitting data to the ADSL line.
The Virtual Path Identifier setting.
The Virtual Channel Identifier setting.
Using Modem Mode