Connecting The Dg632 To Your Network; How To Connect The Modem - NETGEAR DG632 Reference Manual

Connecting the DG632 to Your Network

This section provides instructions for connecting the DG632 modem router to your network.
Note: The Resource CD included with your modem contains an animated Installation Assistant to
help you through this procedure.

How to Connect the Modem

There are three steps to connecting your firewall:
Connect the modem to your ADSL line.
1.
Connect the modem to the computers on your network.
2.
Log in to the modem.
3.
Connect to the Internet.
4.
Follow the steps below to connect your modem to your network. Before you begin, locate the
ADSL configuration information from your Internet Service Provider (ISP).
1. C
ONNECT THE
You need to install a filter on every telephone or device that shares the same phone
a.
number as your ADSL modem. Select the filter that came with your modem.
One-Line Filter
Two-Line Filter
With Splitter
Figure 3-3: ADSL microfilters
Note: If you purchased the DG632 in a country where the filter is not included, you must
acquire one.
Connecting the Modem to the Internet
Reference Manual for the Model DG632 ADSL Modem Router
DG632 ADSL L
TO THE
Phone
DSL
Phone
.
INE
Splitter
3-5