Table of Contents
Advertisement
CenterPunch Lighting Effects Server Owner's Manual
Connectors on the left side of the 4DMX-HUB unit:
•
L1 CPU COM LINE: Network connection with POE for the 4HD/5HD-CPU.
•
ANET1: Currently not used.
•
ANET2: Currently not used.
•
ANET3: Currently not used.
•
P1 AUX: Currently not used.
•
D1 DMX COM LINE: Connect here the first DMX Dimmer 2 unit.
•
POWER INPUT: Connect here the power line (range: 100 - 240 V – 50 / 60 Hz).
Connectors on the upper side of the CenterPunch Lighting Effects Server unit:
•
N1 Network: Standard network connection to the scoring network.
1.3 5HD-CPU and 4HD-CPU
IMPORTANT NOTE: the 5HD-CPU unit, P/N: 288250023, is supported by Conqueror Pro version 12 or higher.
The 4HD-CPU and the 5HD-CPU are the core unit for the CenterPunch Lighting Effects Server. Their
functionality is to control the DMX pit lights. They are connected to the 4DMX-HUB unit with a single network
cable and must be installed on the front panel of the 4DMX-HUB unit.
1.3.1 Installation notes
The 4HD/5HD-CPU unit communicates with the 4DMX-HUB via a standard network with POE. The connection
between the 4HD/5HD-CPU and the 4DMX-HUB is between the L1 port of the 4HD/5HD-CPU unit and the L1
port of the 4DMX-HUB, as explained in this manual.
1.3.2 5HD-CPU Label description
The image above displays the label located on the side of the 5HD-CPU unit.
1. Manufacturer (QubicaAMF Europe S.p.A.);
2. Name of the unit (5HD-CPU);
3. Part number with bar code (P/N: 288250023);
4. List of certifications (CE certification);
5. Serial number with bar code;
6. Electrical specifications (12 VDC Max 30W Ext. Pow. Plug).
P/N: 400275000; Rev. F, 03/22
3
Advertisement
Table of Contents
