Browser Connection; System Requirements; Establishing Connection - Bosch FLEXIDOME IP 3000i IR User Manual

Hide thumbs Also See for FLEXIDOME IP 3000i IR:
Table of Contents

Advertisement

FLEXIDOME IP 3000i IR | FLEXIDOME IP micro
3000i | DINION IP 3000i IR | FLEXIDOME IP turret
3000i IR
1

Browser connection

A computer with a web browser (Google Chrome, Microsoft Edge, or Mozilla Firefox) is used
to receive live images, control the unit, and replay stored sequences. The unit is configured
over the network using the browser.
1.1

System requirements

Our recommendations are:
Note:
To see live images in your browser it might be necessary to download and install the MPEG-
ActiveX from the Bosch download store.
1.2

Establishing connection

The unit must have a valid IP address to operate on your network and a compatible subnet
mask.
By default, DHCP is pre-set at the factory to On plus Link-Local so a DHCP server assigns an
IP address or, if no DHCP server is available, a link-local address (auto-IP) is assigned within
the range 169.254.1.0 to 169.254.254.255.
You can use the Configuration Manager to find the IP address. Download the software from
http://downloadstore.boschsecurity.com.
1.
2.
3.
Note:
If you cannot connect, the unit may have reached its maximum number of connections.
Depending on the device and network configuration, each unit can have up to 50 web browser
connections, or up to 100 connections via Bosch Video Client or BVMS.
Password protection in the device
The device is password protected across various authorization levels.
You must set a password for the 'service' authorization level to get access to the device.
Make sure the password obeys these conditions:
1.
2.
Bosch Security Systems B.V.
Computer with Dual core HyperThreading processor or better
Graphic card with performance that matches or is better than the resolution of the
camera
Windows 7 or later operating system
Network access
Internet Explorer version 11 or later
– or –
Application software, for example, Video Security Client, Bosch Video Client or BVMS.
Start the Web browser.
Enter the IP address of the unit as the URL.
During initial installation, confirm any security questions that appear.
8 to 19 characters in length
Upper and lower case letters
Minimum of 1 digit
Minimum of 1 special character
These special characters are not allowed: '@', '&', '<', '>', ':', '+'
Enter the password in the two text fields.
Click Set. If the password is valid, you get access to the device.
User manual
Browser connection | en
2023-01 | V04 |
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents