Quick Start - TOMZON A23 User Manual

Battery Installation of Remote control
1. Open the battery cover of remote control and install 3 AAA batteries
(not included in the packaging) as shown in picture below:
Tips:
1. Be sure that the batteries of the drone and remote control are fully
charged before flying. Otherwise, the drone cannot take off in low
battery mode.
2. It is not recommended to have mixed use of acid and alkaline
batteries. Please take out the batteries when drone is long idled.
Frequency Match
1. Long press the power button on upper cover to turn on the drone
and indicator flashes; then place the drone on a horizontal ground.
2. Turn on the remote control and it pairs the drone automatically. The
pairing is complete when the remote control beeps. At this time, the
Indicator lights of the remote control and the drone are always on.
Step 1

Quick Start

05
Step 2