Overheat Protection; Cleaning And Maintenance - Haverland CHT-180 Instruction & Installation Manual

EN
2. OPERATION

2.4 OVERHEAT PROTECTION

The heater is protected with an overheat protector that switches off
the heater automatically in case of overheat. e.g. due to the total
or partial obstruction of the grill. In this case, unplug the appliance,
wait about 30 minutes for it to cool and remove the object which is
obstructing the grill. Then switch it back on as described above.

2.5 CLEANING AND MAINTENANCE

1. If you don't use the heater for a long time, please wipe the
surface and store it. Lay the heater on a ventilated and dry place.
Avoid humidity and any kind of pressure to the unit.
2. Wait for the heater being cool and unplugged it, then clean it.
Wipe it clean with wet washcloth or cleaner. Never directly wash
with water; do not drop the water into the radiator. Never clean it
with acids, chemical thinner, gasoline, benzene, etc.
3. Before use it again, please check it and make sure the outlet
ventilation does not has any foreign objects.
EN
CHT180
19