2. ITEMS SHIPPED IN THE BOX
Table 2-1, AES LiFePO
Items
Description
1
Battery
1
Terminator
1
Splitter
1
Terminal cover (black)
1
Terminal cover (red)
2
M8 bolt
1 set
Safety warning decals
3. SPECIFICATIONS
All specifications in this document are published @25ºC / 77ºF .
3.1 Electrical Specifications
Table 3-1, AES LiFePO
Electrical Specifications
Nominal Voltage
Nominal Energy
Usable DOD
Rated Wh Capacity (1C)
Rated Ah Capacity (1C)
Charge Bulk Voltage - Bulk VDC
Charge Absorption Voltage - U1 MAX
Charge Float Voltage - U2
Charge Termination Current
Low Voltage Disconnect Recommended
Low Voltage Disconnect
Max. Continuous Discharge Current
Max. Continuous Charge Current
Peak Discharge Current (3 seconds)
Fuse (Provides backup overcurrent protection)
Maximum short circuit fault current
Arc Flash Incident Energy IEm
Arc Flash Incident Energy AFB
(a)
Charge termination current is permitted to be less than specified.
(b)
Under load, low Voltage Disconnect is based on 2.5 VPC. In no load conditions, do not allow the battery to self-
discharge below 3.0 VPC.
box contents
4
Electrical Specifications
4
(a)
(b)
42-48-6650
51.2 V
7 .39 kWh
90%
6.65 kWh
130 Ah
54.4 Vdc
54.4 Vdc
53.6 Vdc
2 A
48.0 V
40.0 V
130 Adc
130 Adc
300 Adc
200 A
6.0 kA / 5.5 ms
0.1 cal/cm
9.4 cm
6
2