Table of Contents
Advertisement
6.3.1 AEbus Port (LYNK Port) Communication RJ45 Pin Assignment
1 2 3 4 5 6 7 8
Figure 3. AEbus Port (LYNK Port)
Communication RJ45 pin assignment
(1)
Do not populate. Do not terminate to power. Do not terminate to ground. Do not terminate to CAN_L or CAN_H.
• Isolate unused pins. Crossing PIN functions may cause system damage.
• Do not terminate unused wires to ground, power, or other functions.
• Mixing the AEbus Network with other networks may result in equipment malfunction
and damage.
6.4 Equipment Ground
Grounding the battery is not required.
7. THEORY OF OPERATION
7.1 Ingress Protection IP55
Ingress protection rates the degree of protection provided by mechanical casings
and electrical enclosures against intrusion, dust, accidental contact, and water
under specified conditions. The IP55 rating indicates that the product is touch-proof
and protected from limited dust ingress. And protect from low-pressure water jets
from any direction.
IP codes guide suitability for use under different environmental conditions. IP
ratings do not indicate fitness for purpose or confer a performance guarantee.
Pin Number
(1)
1
(1)
2
(1)
3
4
5
(1)
6
7
8
NOTICE
11
Function
Reserved. Do not use.
Reserved. Do not use.
Reserved. Do not use.
CAN Low
CAN High
Reserved. Do not use.
CAN Ground
CAN Ground
Advertisement
Table of Contents
