Detector Cable Wiring - Honeywell Fire Sentry FS7-2173-2RP Installation Manual And Operating Manual

Fire Sentry FS7-2173-2RP Fire Detector
Installation Guide and Operating Manual
MAN0934_V1_1515001_Rev F_08-12
SECTION 5: DETECTOR CABLE WIRING
Table 1: Pigtail Wiring Data
Wire Wire
Color
Number
1 BLACK
4 RED
2 GREEN
3 WHITE
5 GRAY
6 PURPLE
7 BROWN
9 BLUE
8 BROWN /
WHITE
BLUE /
10
WHITE
11 YELLOW
13 ORANGE
12 YELLOW
/ BLACK
14 ORANGE
/ BLACK
None Non-
isulated
Wire
Note: The Fire ALERT and ALARM relay loop-through contacts may be used for End-of-Line
(EOL) resistors for supervision of contact wiring.
Warrantee
The Control Panel is warranted for two years against defects in materials and
Workmanship.
24 V Return (-) Supply
+ 24 VDC Supply
FireBus RS-485 Digital Data A Signal
FireBus RS-485 Digital Data B Signal
Fault Relay Terminal A, Contact to B during Normal Operation
Fault Relay Terminal B, Contact to A during Normal Operation
Fire ALARM Relay Terminal A
Fire ALARM Relay Terminal B
Fire ALARM Relay Terminal A loop-through
Fire ALARM Relay Terminal B loop-through
Fire ALERT Relay Terminal A
Fire ALERT Relay Terminal B
Fire ALERT Relay Terminal A loop-through
Fire ALERT Relay Terminal B loop-through
Cable shield – To be terminated at the Fire Alarm Panel Chassis
Ground.
Description
9