Table of Contents
Advertisement
PRESYS
|
Instruments
It is possible to calibrate only one point without rendering invalid the other
points already calibrated, in case the calibration of this point was not carried out
properly.
In order to return to normal operation move back through the hierarchical
levels until reaching level zero.
Figure 37 shows the input and output calibration options for calibration level 8.
(1) SIMILAR TO 5V (INPUT), SEE TEXT.
(2) SIMILAR TO 5V (OUTPUT), SEE TEXT.
(3) FOLLOWS THE SAME OPTIONS OF OUTPUT 1.
(4) FOLLOWS THE SAME OPTIONS OF CH-1.
(5) FOR A 5PSI SENSOR.
DCY - 2057 Pressure Controller
Fig. 37 - Calibration Level Options
Maintenance
Page 57
Advertisement
Table of Contents
