Development On The Cubox - Ocean Sonics Processing Buoy User Manual

4. Unscrew 6 Phillips screws to access the electronics.
5. Slowly lift the top hat and place on a flat surface while accessing inside of the end
cap.
6. CuBox ports can be accessed from this position or the CuBox can be removed from
the Velcro strap and connectors for programming.
a. The 5V power adapter can be used to power the CuBox outside of the buoy.

Development on the CuBox

The development package can be accessed on the USB drive included with buoys.
The archive can be extracted and read, starting at readme_top.txt.
All the sub-folders in the archive should have their own readme file associated.
The package can also be accessed online by contacting
support@oceansonics.com.
Ocean Sonics Processing Buoy User Guide
daniel.kehsler@oceansonics.com
April 2020
or
P.5