NetMedia CTV1-M Installation Instructions

PROGRAM
AUDIO OUT
BUTTONS
LEFT RIGHT
*OPTIONAL:
To Telephone,
TELEPHONE
Satellite Receiver
JACK

HOW TO CONNECT THE CTV1-M

1.
Insert the male RCA connector from the video source into the CTV1-M video in.
Insert the 3.5mm stereo jack from the audio source into the CTV1-M audio input.
2.
3.
*Insert phone cable from a telephone connection (with Caller-ID service activated) into the CTV1-M
telephone jack marked LINE.
Use a male F-Connector to output the CTV1-M modulated signal to a splitter/combiner, cable distribution
4.
box or television.
5.
Plug-in the provided 12V DC, 300mA power supply into the power and CTV1-M.
6. (Optional) Connect the telephone jack marked TEL into a telephone or satellite receiver.
* Do this step if you want to display the Caller-ID information on the modulated channel.
CTV1-M-2page.cdr
Connecting the NetMedia CTV1-M
AC POWER SOURCE
10940 N. Stallard Place, Tucson, Arizona 85737
(520) 544-4567 Fax: (520) 544-0800
F-Connector
HEAD END OF HOME
CABLE DISTRIBUTION
NetMedia, Inc.
Email: info@netmedia.com
www.netmedia.com
OTHER TV SIGNAL
SPLITTER/COMBINER
AUDIO/VIDEO SOURCES
*OPTIONAL:
VIDEO OUT
VCR/LASERDISC PLAYERS
SATELLITE SYSTEMS
C
T
V
CABLE MAIN OR
*
1
M
TELEVISION
I
N
S
T
A
L
L
A
T
I
O
N
M
O
D
U
L
A
T
O
R
S
Rev. 0002A