Hayward ColorLogic Bubbler Owner's Manual page 8

2. Remove the following parts from the box: Housing, Gunite Shield, and 2 Threaded Plugs.
These parts come assembled together as shown below. DO NOT DISASSEMBLE.
3. Verify that the pipe guide is on the 2 pipes to ensure proper distance between them (as seen
below). If the guide is not on the pipes, put it on now to make the next step easier.
Electrical Line
7
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Clearance Table
Light
No luminaire
ColorLogic 320 standalone
ColorLogic 160 standalone
CrystaLogic 320 standalone
CrystaLogic 160 standalone
ColorLogic 320 network
ColorLogic 160 network
2.5"
Clearance
Requirements
Not Applicable
8"
8"
8"
8"
10"
10"
Pipe Guide
Plumbing Line