Kenwood DMX7022S Instruction Manual page 9

In-Car Connections In-Car Connections
• Once the connection is established, it is registered
in the unit until you initialise the Bluetooth settings
(page 38) or the unit itself (page 39). Up to five
devices can be registered in total.
• To use the Bluetooth function, you need to turn on
the Bluetooth function of the device.
Auto pairing
When <Auto Pairing> is set to [ON] (page 28),
Android devices with Android Auto are automatically
paired when connected via USB. (Not available
depending on Android OS versions.)
Pairing a Bluetooth device using SSP
(for Bluetooth 2.1)
1
Display the Home screen.
2
Display the <Device List> screen.
From the Home screen (page 3), touch as
follows:
Then, on the <SET-UP> screen, touch as follows:
[System] → <Connections SETUP> : [Enter]
On the <Connections SETUP> screen, touch as
follows:
<Device List> : [Enter]
• You can also use the pop-up function menu to
display the <Device List> screen (page 13).
3
Make the unit ready for pairing.
On the <Device List> screen:
Please open Bluetooth settings on your device and
select the device name below
DMXXXXXXX
Cancel
4
Search for the unit ("DMX7022S") from
your Bluetooth device.
5
Confirm the request both on the device
and the unit.
On the device: Confirmation method varies for the
device.
On the unit:
BT Pairing request
To perform BT Pairing
Please confirm the device display
DMXXXXXX (device name)
012345 (PIN code)
Pair Cancel
Pairing is complete.
To reject the request: Touch [Cancel].
6
Register the usage of the Bluetooth
device.
• See "Registering the usage of the devices" on
page 8.
ENGLISH 7