Table of Contents
Advertisement
E. User Command and Results Frame
Whenever you click button or make some event in service software, every ordered event is displayed in
this frame. You can also see calibration results here.
F. Ramp shape button
This button is for burst shape table. But it is deactivated in service software.
7.2 Calibration
7.2.1 Overview
The calibration values of the phone reside on the Flash. The contents of the Flash can be read by the
service software and saved as a file. This is advisable when there is need to retain that information, e.g.
in view of replacement of the circuit. The program also enables writing the default parameters on the
Flash, in which case all calibration steps should be carried out. The service software can't control the
equipment, so only manual calibration process is possible.
7.2.2 Equipment List
Equipment for Calibration
Wireless Communication Test Set
RS-232 Cable and Test JIG
RF Cable
Power Supply
Service S/W
PC (For Software Installation)
Table 7-1. Calibration Equipment List
HP-8960,HP8922,CMU200, any
Pentium Ⅱ class above 300MHz
-125-
Type / Model
other call equipment
Laputa
Brand
Advertisement
Table of Contents
