Managing The Fastmile 5G Gateway 2 With The Wi-Fi Mobile App - Nokia FastMile 2 User Manual

5g gateway

Hide thumbs Also See for FastMile 2:

Table of Contents

User Guide

Note: The signal search may take a few minutes.

Wait until the LED is green. This indicates connectivity to a 4G or 5G network.

For more information about the LED, refer to the

section.

Note: You may need to try the FastMile 5G Gateway 2 at several locations before the LED

indicates a good signal.

Once you find a good signal, do not reposition the device. If the position changes, you may

need to verify the signal strength again.

Managing the FastMile 5G Gateway 2 with the

Wi-Fi Mobile App

To manage the gateway, use either the WebUI or Wi-Fi Mobile App. The Wi-Fi

Mobile App provides information that can help with installation, and provides

guidance for tasks such as how to configure Wi-Fi settings and how to add Wi-Fi

Beacon 2 devices to the Wi-Fi network. The Wi-Fi Mobile App can be downloaded

from Google Play or the Apple App store.

After you have downloaded the app to your smart phone or tablet, use the in-app QR

code scanner to read the QR code that is located on the label on the underneath of

the FastMile 5G Gateway 2.

A generic sample of the label below shows the location of the QR code. Note that

label content may differ per service provider requirements.

3TG-02464-AAAA-TCZZA-01

Use subject to agreed restrictions on disclosure and use.

Setting up the FastMile 5G Gateway 2

Understanding the LED colors

Table of Contents