Using The Power Button - Nokia FastMile 3.1 5G12-13W-B User Manual

Troubleshooting
Note: You may need to repeat the steps several times before finding the final location for
the FastMile 5G Gateway 3.1.
Once you have a good signal, it is important that you do not reposition or rotate the
FastMile 5G Gateway 3.1. You are now ready to connect devices to your FastMile
5G Gateway 3.1.
The table provides helpful actions to perform when the FastMile 5G Gateway 3.1
LED has the following behavior.
LED behavior requiring action
Table 4
Status LED (3 color)
behavior
Blinking slowly (red)
Solid (red)

Using the power button

The power button is located on the side of the FastMile 5G Gateway 3.1 and is
marked on/off.
78
• move the FastMile 5G Gateway 3.1 to a different position, for example, the other
side of the room or a higher position
• connect the FastMile 5G Gateway 3.1 to an electrical outlet at the new location
and power it on
• check the LEDs as described in
quality of signal in the new position and follow the actions you may consider in
the section
5G LED (single Signal strength LEDs
color) (multiple one color)
Off Off
Off Off
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
Understanding the LED colors
Reason
Missing SIM card,
or SIM card is PIN-
locked, or SIM card
is broken and could
not be recognized
by the CPE
No radio link
or
No Internet
User Guide
to determine the
Action
Check and/or
replace SIM card
(it is
recommended to
replace a SIM
card with a new
PIN-locked SIM
card)
Relocate gateway
3TG-02290-AAAA-TCZZA-02