Ebyte EA01-SG User Manual page 23

Chengdu Ebyte Electronic Technology Co., Ltd.
 The AT Command Mainly Configure Power Supply Mode Of GNSS. The Default Power Supply Is Turned On, And The GNSS
Power Supply Should Be Turned Off After The Business Interaction.
 Parameter Configuration Instructions：<Mode>，0 Means GNSS Power Is Turned Off, 1 Means Only For GNSS Auxiliary Power,
And 2 Means That Both GNSS Primary And Secondary Power Are Supplied.The Default Is 2, And at + NRB Saves In Flash.
CHAPTER IV: 3GPP STANDARD DIRECTIVE AND OPERatOR CLOUD
PLatFORM STANDARD RECTIVE
This Section Refers To The Ea01-S 3Gpp And Operator Cloud Platform Standard Instruction Manual
Copyright ©2012–2020，Chengdu Ebyte Electronic Technology Co., Ltd
EA01-SG User Manual
22