Ebytetransparent Transmission Application Enable; Select The Service To Automatically Connect When Power On - Ebyte EA01-SG User Manual

Chengdu Ebyte Electronic Technology Co., Ltd.
CHAPTER Ⅲ: EXPLANATION OF EBYTE EXTENDED INSTRUCTIONS
AND FUNCTIONS
3.1 EBYTE TRANSPARENT TRANSMISSION APPLICATION ENABLE
AT ORDER
AT+EBYTEAPP=<ENABLE><NEWLINE>
AT+EBYTEAPP
This at Command Configures Whether To Use TCP, DUP, EBYTE Cloud, MQTT And COAP Transparent Transmission

Applications. The Default Is To Enable at+EBYTEAPP=1. When Access To Mobile Is Required at+EBYTEAPP=0 Is Required
To Close The Transparent Transmission Application When One net Cloud, Telecommute Cloud Or Socket Extended at Command
Is Transmitted.
Configuration Parameter Description: <Enable>,0 Means To Close The Transparent Transmission Application, 1 MeansTo Open The

TransparentTransmission Application.
Note: When Power-Off Saving Is Required, Input at+NRB Command Will Save Parameters To Flash, And Automatically Restart To Take

Effect.
3.2

SELECT THE SERVICE TO AUTOMATICALLY CONNECT WHEN POWER ON

AT ORDER
AT+POWONLINK=<TYPE ><NEWLINE>
AT+POWONLINK
The AT command configuration selects the SOCKET the at is automatically connected when powered

on. By default, only the TCP/UDP channel is automatically connected when powered on.
Description of configuration parameters: , 1 means the MQTT channel, 2 means the COAP channel, 3

means the power is connected to the Eater Cloud channel
Note:When Power-Off Saving Is Required, Input at+NRB Command Will Save Parameters To Flash, And

Automatic ally Restart To Take Effect.
Copyright ©2012–2020， Chengdu Ebyte Electronic Technology Co., Ltd
RESPONSE
OK
EBYTE APP ENABLE:<ENABLE>
OK
RESPONSE
OK
POWER ON LINK SOCKET TYPE: <TYPE>
EA01-SG User Manual
10