1.1 Brief Introduction EA01-D is a NB-IOT data transmission module developed by Ebyte for the purpose of realizing mutual data transmission between serial device and network server merely by user simple setting. It supports B3, B5, and B8 frequency bands. The module is well equipped with software and functions, covering most of general application scenarios.
The hardware devices required for this test are as follows: Before testing, please connect the serial cable, SIM card (insert the notch outwards), antenna and other related devices. Details are as follows: EA01-D 5V-18V power adapter or 4.2V lithium battery...
(4) Restart the module and await the device LINK light to be on; (5) Follow the WeChat official account of "Ebyte" on the mobile phone, enter the page, and click in turn: Customer Support -> Device Test, as shown in the below screenshot of the mobile phone page.
(1) Currently, MQTT, COAP, and TCP/UDP are supported. Currently, the module supports two sockets, and allows TCP/UDP and one of MQTT, COAP and Ebyte Cloud to communicate at the same time. TCP/ODP always opens socket0, and one of MQTT and COAP opens socket1.
(2) If PDU _ type selects TCP/UDP, the TCP/UDP heartbeat packet will be sent; if MQTT is selected, the MQTT heartbeat packet will be sent ("PINGRESP" will be printed on the serial port after successful sending); Ebyte cloud heartbeat packet will be sent if Ebyte cloud is selected.
<type>, 0 indicates that the registration package type is in HEX format, and 1 indicates that the registration package type is in ASCII code ◆ (string) format. <data>,refers to the data content of the registration packet sent. The maximum length is less than 40. The default value is "Ebyte Register ◆ packet".
Page 21
AT+CIMI command to get the CIMI number and fill it in the red box, the green box will get the keysn sequence value. ◆ Note: before using Ebyte Cloud, first configure AT+PDUTYPE=3 to set the data protocol type to Ebyte Cloud ◆...
4 Important Statement Ebyte reserves the right of final interpretation and modification of all contents in this manual. Due to the continuous improvement of product hardware and software, this manual may be changed without prior notice. The latest version of the manual shall prevail.