Ebyte E103-W10 User Manual
  1. Manuals
  2. Brands
  3. Ebyte Manuals
  4. Network Hardware
  5. E103-W10
  6. User manual
Ebyte E103-W10 User Manual

Ebyte E103-W10 User Manual

Transfer wifi module
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
E103-W10 User Manual
ESP8285 Serial transfer WiFi module

Advertisement

Table of Contents
loading

Related Manuals for Ebyte E103-W10

Summary of Contents for Ebyte E103-W10

  • Page 1 E103-W10 User Manual ESP8285 Serial transfer WiFi module...

  • Page 2: Table Of Contents

    8.3 BER(Bit Error Rate) is high........................18 9 Production guidance ............................19 9.1 Reflow soldering temperature........................19 9.2 Reflow soldering curve..........................19 10 Related module.............................. 19 11 Antenna recommendation ..........................20 Revision history ..............................21 About us ................................21 Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.

  • Page 3: Disclaimer

    E103-W10 User Manual Disclaimer EBYTE reserves all rights to this document and the information contained herein. Products, names, logos and designs described herein may in whole or in part be subject to intellectual property rights. Reproduction, use, modification or disclosure to third parties of this document or any part thereof without the express permission of EBYTE is strictly prohibited.

  • Page 4: Introduction

    Internet and other fields. E103-W10 supports the standard IEEE 802.11b/g/n protocol, which is easily configured to enable network access and minimize developer work and project development time.

  • Page 5: Specification And Parameter

    802.11 standard (such as U-APSD), turn off the Wi-Fi Modem circuit to save power. For example, in DTIM3, keep the sleep interval of 300 ms, and wake up 3 ms each time to Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.

  • Page 6: Size And Pin Definition

    Test condition：clear and open area, antenna gain: 5dBi， Reference distance 250m antenna height: 2.5m Crystal frequency 26MHz Encapsulate Interface 1.5mm Communication Interface UART Outter size 15*12.3mm RF interface IPEX Equivalent impedance : 50Ω Weight 0.9g 3 Size and pin definition Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.

  • Page 7: Recommended Wire Diagram

    IO14 Input/Output GPIO14; HSPI_CLK IO12 Input/Output GPIO12;HSPI_MISO IO13 Input/Output GPIO13; HSPI_MOSI; UART0_CTS IO15 GPIO15; HSPI_CS；UART0_RTS; Resistance is connected to ground Input/Output in the inside of the module Module power：2.7~3.3V 4 Recommended wire diagram Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.

  • Page 8: Operating Guidance

    (5) The RXD0 of the Wi-Fi module is connected to the TXD of the external MCU, and the TXD0 of the Wi-Fi module is connected to the RXD of the external MCU. 5 Operating guidance 5.1 As TCP Client, single connection 1. Setting Wi-Fi mode Command AT+CWMODE=3 // SoftAP+Station mode Response: OK For example: Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
  • Page 9 // password：Key of the router Response: OK Example: (router name E880-IR01, password JSZXE880) 3. Checking local IP address AT+CIFSR Example： +CIFSR:APIP,"192.168.4.1" //Router IP address +CIFSR:APMAC,"c6:4f:33:d6:4a:fc" +CIFSR:STAIP,"192.168.1.124" //E103-W10 IP address from the router +CIFSR:STAMAC,"c4:4f:33:d6:4a:fc" Example: Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
  • Page 10 4. The PC uses a wireless connection to the router . 5. The PC views the IP address of the "WLAN adapter Wi-Fi". Using it later when creating the server. Open “command prompt ”，and writing ipconfig. Checking IP address: Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
  • Page 11 6. Open the network debug assistant on the PC and create the server. Using the "TCP-UDP Test Tool" to do the test. Create a server with an IP address of 192.168.1.156 and a port of 8080. Starting the server Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.

  • Page 12: At The Same Time, The Pc-Side "Tcp-Udp Test Tool" Displays The Connection Window

    Chengdu Ebyte Electronic Technology Co.,Ltd. E103-W10 User Manual 7. E103-W10 connects to PC server as TCP client. At the same time, the PC-side "TCP-UDP Test Tool" displays the connection window: Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.

  • Page 13: As Tcp Server, Single Connection

    Recv 5 bytes //Length of the data received by the serial SEND OK //Successfully 9. Data received 5.2 As TCP server, single connection 1. Setting Wi-Fi mode Command AT+CWMODE=3 // Soft AP+Station mode Response: OK Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
  • Page 14 3. Configuration ESP Soft AP AT+CWSAP=”E103-W10 _SOFTAP”,”12345678”,5,3 Response: OK 4. Checking local softAP addres, example in the following picture is 192.168.4.1 5. Creating TCP server AT+CIPSERVER=1 // Default port：333 Response: OK 6. PC connected to E103-W10 SoftAP Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
  • Page 15 Chengdu Ebyte Electronic Technology Co.,Ltd. E103-W10 User Manual 7. Open the "TCP-UDP Test Tool" to create TCP Client and connect to the TCP server created by E103-W10 Click connection, the following picture shows connect successfully 8. Data transmission //The first connection ID defaults to 0...

  • Page 16: Network Description

    STATION-AP mode, and up to 10 Wi-Fi devices at the same time in AP mode. E103-W10 supports three Socket roles: TCP Server, TCP Client, and UDP. Up to 5 Socket connections are supported simultaneously in TCP Server mode. TCP-based connectivity mechanisms, if you need to be connected for a long time, be aware that you should use the TCP heartbeat pack.
  • Page 17 The networking model is similar to the first one, with the difference that the module is built in STATE mode with TCP Server instead of TCP Client. This mode can support up to 5 remote device connections under networked conditions. Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
  • Page 18 RATIONAL, that is, in the network has a maximum of 9 module devices. TCP Server can be built on any module under complete intranet completion, and the remaining 10 modules can communicate with TCP Client (but no more than 5 clients can access TCP Server at the same time). Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.

  • Page 19: At Command

    Chengdu Ebyte Electronic Technology Co.,Ltd. E103-W10 User Manual 7 AT command Please refer to E103-W10 user manual: https://www.ebyte.com/en/downpdf.aspx?id=1375 8 FQA 8.1 The transmission distance is not ideal When there is a straight-line communication barrier, the communication distance will be attenuated accordingly;...

  • Page 20: Production Guidance

    Time 25℃ to peak temperature 6 minutes max 8 minutes max 9.2 Reflow soldering curve 10 Related module Model No. Core IC Frequency (Hz) Tx power(dBm) Distance(km) Size(mm) Package Interface E103-W01 ESP8266EX 2.4G 16*24 Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.

  • Page 21: Antenna Recommendation

    Short straight antenna &omnidirectional TX2400-JW-5 Rubber 2.4G SMA-J Fixed bend antenna &omnidirectional TX2400-JK-11 Rubber 2.4G SMA-J Flexible &omnidirectional antenna TX2400-JK-20 Rubber 2.4G SMA-J Flexible &omnidirectional antenna TX2400-XPL-150 Sucker 2.4G SMA-J Small Sucker antenna antenna&cost-effective Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.

  • Page 22: Revision History

    Content adjusted About us Technical support: support@cdebyte.com Documents and RF Setting download link: www.ebyte.com Thank you for using Ebyte products! Please contact us with any questions or suggestions: info@cdebyte.com ------------------------------------------------------------------------------------------------- Phone: +86 028-61399028 Web: www.ebyte.com Address: B5 Mould Park, 199# Xiqu Ave, High-tech District, Sichuan, China...

Table of Contents