Table of Contents
Advertisement
•
• A000 to ZZZZ
B20B
Alarm Lamp and ON Lamp in the Event of an Error
The number of times the Alarm lamp flashes and the number of times the Alarm lamp and ON lamp
alternately flash can be used to determine the appropriate action.
Number of times the Alarm lamp flashes and what to do
Number of
Cause
flashes
2
During manual duplex printing:
Other:
3
Paper is jammed.
4
Print head is not installed properly.
5
The print head may not be installed properly or
may not be compatible with this printer.
6
Business card-sized paper was loaded horizon-
tally, which caused it to jam.
8
Possible causes include the following.
• Maintenance cartridge is not installed.
• The maintenance cartridge is not installed
properly.
• The maintenance cartridge may not be com-
patible with this printer.
9
There may be paper left inside the printer.
10
Unable to proceed with print head replacement
because the maintenance cartridge is almost full.
11
Cannot perform printing with current print set-
tings.
What to Do
Follow the instructions on the computer screen to
prepare the other side for printing.
Refer to the page corresponding to the support
code displayed on your computer screen.
1000
1070
2114
2116
What to Do When Paper Is Jammed
1470
1431
1432
1471
1476
What to Do When Paper Is Jammed While
Printing Business Cards
Refer to the page corresponding to the support
code displayed on your computer screen.
1496
1723
1725
What to Do When Paper Is Jammed While
Printing Business Cards
1372
Refer to the page corresponding to the support
code displayed on your computer screen.
4103
241
Advertisement
Table of Contents
