Think Safety; Fcc Caution - Bosch GDS18V-330C Operating/Safety Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

1605A00164 GDS18V-330C 20220224.qxp_GDS18V-770 2/25/22 1:25 PM Page 14
To reduce the risk of injury read the operating instructions included with
Bosch GCY42 connectivity module. Operating instructions for GCY42
connectivity module include important information not covered in this manual.
Bluetooth®
the vicinity of gas stations, chemical
plants, areas where there is danger of
explosion and areas subject to blasting.
Do not use the power tool with
Bluetooth® in airplanes. Do not use the
power tool with Bluetooth® in the vicinity
of medical devices. Avoid operation in the
direct vicinity of the human body over
longer periods of time. When using the
power tool with Bluetooth®, interference
with other devices and systems, airplanes
and medical devices (e.g., cardiac
pacemakers, hearing aids) may occur. The
Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by
Robert Bosch Tool Corporation is under
license.
by your Bluetooth® device manufacturer.
Failure to follow recommended procedures
could result in personal injury or property
damage.
Bluetooth® devices to control or change
power tool functions. Operation of the
device may be in a different area than the
paired power tool. Paired devices may have
functionality which allows timed event
programming, including automatically
powering on (e.g. flood light). Depending
upon the power tool, these unattended
operations or function changes without
direct line of sight to the paired tool could
result in personal injury or property
damage.
Settings may be different than when the
tool was last used. The connectivity module
enables transfer of data and settings based
on Bluetooth® wireless technology. With
Connectivity
Do not use the power
tool with Bluetooth® in
Follow all instructions
and warnings provided
Exercise
extreme
caution when using
Always
check
tool
settings before use.
module installed, select tool settings may
be changed remotely by a paired
Bluetooth® device and user installed app.
a radio interface. Local operating
restrictions, e.g. in military sites or
hospitals, are to be observed. Transmitters
have
demonstrated
unintentionally interfere with other devices.

Think safety

SAFETY IS A COMBINATION OF OPERATOR
COMMON SENSE AND ALERTNESS AT ALL
TIMES WHEN THE TOOL IS BEING USED.

FCC caution

The manufacturer is not responsible for
radio interference caused by unauthorized
modifications to this equipment. Such
modifications could void the user's
authority to operate the equipment.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
1) This device may not cause harmful
interference, and
2) This
device
interference
interference that may cause undesired
operation.
NOTE! This equipment has been tested and
found to comply with the limits for a Class
B digital devices, pursuant to Part 15 of the
FCC rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be
determined by turning the equipment off
14
The connectivity module
GCY42 is equipped with
an
ability
to
must
accept
any
received,
including

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gds18v-330pcGds18v-330cb25Gds18v-330cn

Table of Contents