Think Safety - Bosch GSR18V-800C Operating/Safety Instructions Manual

To reduce the risk of injury read the operating instructions included with
Bosch GCY42 connectivity module. Operating instructions for GCY42 connectiv-
ity module include important information not covered in this manual.
Bluetooth®
Do not use the power tool
with Bluetooth® in the vicin-
ity of gas stations, chemical plants, areas
where there is danger of explosion and areas
subject to blasting. Do not use the power tool
with Bluetooth® in airplanes. Do not use the
power tool with Bluetooth® in the vicinity of
medical devices. Avoid operation in the direct
vicinity of the human body over longer periods
of time. When using the power tool with Blue-
tooth®, interference with other devices and sys-
tems, airplanes and medical devices (e.g., car-
diac pacemakers, hearing aids) may occur.
The Bluetooth® word mark and logos are regis-
tered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by Robert Bosch Tool
Corporation is under license.
Follow all instructions and
warnings provided by your
Bluetooth® device manufacturer. Failure to fol-
low recommended procedures could result in
personal injury or property damage.
Exercise extreme caution
when using Bluetooth® de-
vices to control or change power tool func-
tions. Operation of the device may be in a differ-
ent area than the paired power tool. Paired
devices may have functionality which allows
timed event programming, including automati-
cally powering on (e.g. flood light). Depending
upon the power tool, these unattended opera-
tions or function changes without direct line of
sight to the paired tool could result in personal
injury or property damage.
2610070413 GSR18V800C 202308.indd 17
Connectivity
ferent than when the tool was last used. The
connectivity module enables transfer of data
and settings based on Bluetooth® wireless tech-
nology. With module installed, select tool set-
tings may be changed remotely by a paired Blue-
tooth® device and user installed app.
dio interface. Local operating restrictions, e.g.
in military sites or hospitals, are to be observed.
Transmitters have demonstrated an ability to un-
intentionally interfere with other devices.

Think Safety

SAFETY IS A COMBINATION OF OPERATOR
COMMON SENSE AND ALERTNESS AT ALL
TIMES WHEN THE TOOL IS BEING USED.
Always check tool settings be-
fore use. Settings may be dif-
The connectivity module
GCY42 is equipped with a ra-
8/3/23 11:05 AM
17