Datavideo PTC-285W Instruction Manual page 114

7. Please select your desired SRT Encryption way from the "SRT Encryption"
drop-down menu. In this example, we will take the AES-256 as an example.
8. Please enter your desired SRT password in the "SRT Password" option.
Please pay attention that the password must be a 10-digit or above number.
In this example, we will take "1234567890" as an example.
9. Please press the "Apply" button.
10. Please press the "Reboot" button from "System-> Reboot" from the PTC-
285 web UI.
11. Please go back to the Vmix interface, press the "More" option by pressing
the "Add Input" option. After that, please select the "Stream/SRT" option.
Please select "SRT Listener" from the "SRT Type" option. After that, please
enter the default port number "4578" which is provided by the PTC-285 web
UI into the "Port" column. Moreover, please enter your SRT password which is
set in the PTC-285 web UI into the "Passphrase" column. In this example, we
will take "1234567890" as an example. After that, please select "32" from the
"Key Length" drop-down menu. If you have an SRT Stream ID which is
provided by your cloud streaming platform, please enter your SRT Stream ID
in the "Stream ID" column. After all of them are entered, please press the
"OK" button.
114