Daikin Eye Indication Lamp; About The User Interface; Components: Wireless Remote Control - Daikin FVXM35A3V1B Operation Manual

3 About the system
a b c e
h
i
a Front panel
b Air filter
c 2× titanium apatite deodorising filter
d Air outlet
e Flap (horizontal blade)
f Infrared signal receiver for the wireless remote control
g ON/OFF button, Daikin eye and timer lamp
h Air inlet
i Louvers (vertical blades)
j Room temperature sensor
ON/OFF button
If the user interface (e.g. wireless remote control) is missing, you can
use the ON/OFF button on the indoor unit to start/stop operation.
When operation is started using this button, the following settings
are used:
▪ Operation mode = Automatic
▪ Temperature setting = 25°C
▪ Airflow rate = Automatic
3.1.1

Daikin eye indication lamp

The Daikin eye colour will change according to operation.
a ON/OFF button
b Daikin eye
Operation
Automatic
Drying
Cooling
Heating
Fan only
Timer operation
(a)
When the OFF/ON timer or Weekly timer operation is set, the
Daikin eye periodically changes to orange. After lighting orange
for about 10 seconds, it returns to the colour of the operation
mode for 3 minutes. Example: When the timer is set during
cooling operation, the Daikin eye will periodically light orange for
10 seconds, and then switch to blue for 3 minutes.
Operation manual
6
i
f g
h
j
a
b
Daikin eye colour
Red/blue
Green
Blue
Red
White
(a)
Orange
3.2

About the user interface

Wireless remote control
INFORMATION
The indoor unit is delivered with the wireless remote
control as the user interface. This manual describes only
operation with this user interface. If another user interface
is connected, refer to the operation manual of the
connected user interface.
▪ Direct sunlight. Do NOT expose the wireless remote control to
direct sunlight.
▪ Dust. Dust on the signal transmitter or receiver will reduce
sensitivity. Wipe off dust with a soft cloth.
▪ Fluorescent lights. Signal communication might be disabled if
fluorescent lamps are in the room. In that case, contact your
installer.
▪ Other appliances. If the wireless remote control signals operate
other appliances, move the other appliances, or contact your
installer.
▪ Curtains. Make sure that curtains or other objects do NOT block
the signal between the unit and the wireless remote control.
NOTICE
▪ Do NOT drop the wireless remote control.
▪ Do NOT let the wireless remote control get wet.
3.2.1

Components: Wireless remote control

q
p
o
n
m
l
k
j
a Signal transmitter
b LCD display
c Temperature adjustment button
d ON/OFF button
e Vertical swing button
f Floor warming button
g Menu button
h Select button
i Clock setting button
j Cancel button
k OFF/ON timer operation buttons
l Weekly timer operation buttons
m Flash Streamer (air cleaning) operation button
n Econo and Outdoor unit quiet operation button
o Mode button
CVXM-A, FVXM-A, CVXM-A9, FVXM-A9, FVXTM-A
a
b
c
d
e
f
g
h
i
Split system air conditioners
3P477071-2M – 2022.09