To Set Automatic Air Outlet Selection Or Top Air Outlet Only; Floor Warming Operation; To Start/Stop Floor Warming Operation; Powerful And Heat Plus Operation - Daikin FVXM35A3V1B Operation Manual

5 Operation
INFORMATION
▪ During drying operation the airflow comes from the top
air outlet only. See
setpoint" [ 4 8] for setting.
temperature
▪ During Floor warming operation, the airflow comes from
the bottom air outlet only. See
operation" [ 4 10] for setting. Floor warming can be set
only with the automatic air outlet selection setting.
▪ If you change the setting from the automatic air outlet
selection to the top air outlet only in the heating
operation, heating is temporarily stopped to protect the
unit.
▪ Cooling/heating ability is lower when the top air outlet
only is set.
▪ While the air outlet selection is changing, a sound of
the moving damper can be heard.
5.5.1 To set automatic air outlet selection or top
air outlet only
Prerequisite: The default setting is automatic air outlet selection.
1 On the home screen, press
Result: The selection menu appears. The menu number is
blinking.
2 Press or to select menu number .
(2 sec.)
3 Press to enter the setting.
Result: " " is blinking.
4 Press or to change the setting. " " = automatic air
outlet selection or " " = top air outlet only.
5 Press to confirm the selected setting.
Result: The setting is changed.
Note: The display automatically returns to the default screen after
1 minute. To return to the default screen sooner, press
twice.
5.6

Floor warming operation

This operation can effectively warm large floor areas by closing the
top air outlet and increasing the air velocity to reach distant floor
surfaces.
Normal operation
Operation manual
10
"5.2 Operation mode and
"5.6 Floor warming
for at least 2 seconds.
Floor warming operation
INFORMATION
▪ Floor warming operation can be used in heating
operation mode only and with the automatic air outlet
selection setting.
▪ If the room temperature is low, the room may not get
warm enough.
5.6.1

To start/stop Floor warming operation

Prerequisite: This operation can be set only in heating operation
mode and with the automatic air outlet selection setting.
1 Press .
Result: is displayed on the LCD and the operation starts.
2 To stop operation, press
Result: disappears from the LCD and operation stops.
5.7

Powerful and Heat plus operation

5.7.1

Powerful operation

This operation quickly maximizes the cooling/heating effect in any
operation mode. You can get the maximum capacity.
INFORMATION
▪ Powerful operation cannot be used together with Heat
plus, Floor warming, Econo and Outdoor unit quiet
operation. The last selected function takes priority.
▪ Powerful operation will NOT increase the capacity of
the unit if it already operates at maximum capacity.
5.7.2

Heat plus operation

This operation increases the airflow temperature coming from the
unit. The airflow temperature is higher than during the normal
heating operation. Use this operation when you want to feel more
warmth. This operation has a 30 minute duration.
INFORMATION
▪ Heat plus operation can be used in heating operation
mode only.
▪ If the room temperature is low, the room may not get
warm enough.
▪ Do NOT stay close to the air outlet in the direct path of
discharged air for a long time.
▪ After the HEAT PLUS operation ends, depending on
the temperature set for HEAT operation, the power may
be temporarily reduced.
▪ In Multi system connection, the airflow temperature
may be insufficient.
5.7.3 To start/stop Powerful and Heat plus
operation
1 Press one or more times to select operation.
Result: The setting will change as follows.
Display
CVXM-A, FVXM-A, CVXM-A9, FVXM-A9, FVXTM-A
.
Operation
Powerful
Heat plus
Split system air conditioners
3P477071-2M – 2022.09