Parrot CK3100 LCD
2
Parrot
2
CK3100
LCD
Parrot
1
V1
5
V2
2
Mute
4
C
A
B
3
3
1
Connect the power cable of the Parrot MULTICOMM
interface to the 14-way connector of the SWC unit.
2
Join the connector of the kit's control keypad
to the connector on the interface's power cable.
3
Connect the Parrot MULTICOMM interface's power
cable of the hands-free kit.
B: Connect the red wire from the car kit
power cable to the yellow/red power wire
of the interface. power cable.
4
Connect the yellow mute wire
of the Parrot MULTICOMM interface:
- To the Parrot yellow mute wire
- And to the car stereo's mute input if applicable
5
Refer to the chapter entitled «VehicleSpecific Fitting
Procedure» to correctly connect the communication
protocol.