Sony FDR-X3000 Service Manual page 20

3-4. CHECKING THE Wi-Fi FUNCTION
Perform the following procedure to check the Wi-Fi function.
Required equipment: Windows personal computer with Wi-Fi interface
1. Turn on the power of the unit.
2. Enable the Wi-Fi function of the unit.
3. Check the SSID and password by following procedure.
Procedure 1: Check the SSID label attached on the back side of the battery lid.
Procedure 2: Connect the unit and a PC with the micro USB cable and turn the power on. Then select [Computer] → [PMHOME] →
"WIFI_INF.TXT" of [INFO] on the PC.
4. Confirm on the PC that the unit is detected as a connectable wireless network.
5. To further confirm that the unit is connectable, connect the unit to the personal computer and double-click the "current connection" from
the icon displayed on the notice field, make sure that the unit is displayed in the Wireless internet access column.
FDR-X3000/X3000R/HDR-AS300/AS300R
3-5
– ENGLISH –