Specifications - Polaris AutoClearPLUS Installation And Maintenance Manual

Important Information
• For your protection, read all instructions carefully before installing or operating this equipment.
• Do not allow children to handle this product.
• Installation of this equipment should be performed by a licensed electrician and conform to all
National Electric Code (NEC), state and local codes. Installations in Canada must comply to
CEC requirements.
• To avoid electrical shock:
Install all electrical equipment at least 10 feet (3 m) from inside wall of pool or spa.
A ground-fault circuit interrupter (GFCI) must be utilized with this device.
Do not bury cell cord but position it to eliminate contact with lawn mowers, hedge trimmers
and other such equipment.
• Damaged cell cords must be replaced by a Polaris Authorized Service Center.
For customer service or support:
• For on-line support: www.polarispool.com
• To contact Polaris:
US and Canada
Customer Service
2620 Commerce Way
Vista, CA 92081-8438
1-800-822-7933

Specifications

Input Power: 120 VAC 50/60 Hz, 3.0 Amps or 240 VAC 50/60 Hz, 1.5 Amps
Output Power: 26-28 VDC @ 5.2 Amps (max.)
Capacity: 40,000 Gallons
Operating Temp: 50° - 104° F, water temperature
Display LCD, LED array
www.polarispool.com