Polaris AutoClearPLUS Installation And Maintenance Manual page 9

All adjustments to output and superchlorination
functions are made through the Eos system via the
Salt Chlorinator control screen.
Salt reading displays (Test button) and temperature
adjustments (Program button) can still be
accomplished at the AutoClearPLUS unit.
When the Eos (or another controller) is connected, a
flashing triangle will appear in the top left hand
corner of the AutoClearPLUS LCD screen.
Install controller:
1 Replace and secure power supply face plate
and connection cover plate.
2. Remove side anchor screws (4).
3. Engage controller connector.
4. Position controller under power supply.
Align anchor screw holes with holes on
power supply. Insert and tighten
anchor screws.
5. Insert cell wire plug into controller
receptacle. Push upwards and turn
clockwise to engage. Tighten securely.
Cover Plate
To Electrical
Power Supply
www.polarispool.com
Wed, Aug 29 2:04pm
AutoClear
2600
ppm
Mode Normal
Chlorination Off
Air 60° Pool 60° Spa 60°
Eos Control Screen
Power Supply
Anchor Screws
Controller Connection
Controller
Cell Wire Plug