HighPoint SSD7580A Quick Installation Manual page 5
Pcie gen4 x16 8-port u.2 nvme raid controller
Hide thumbs
Also See for SSD7580A:
- Quick installation manual (9 pages) ,
- Installation manual (16 pages) ,
- Installation manual (19 pages)
Advertisement
2.
Shown above is a SFF-8654 to U.2 SFF-8639 cable with a 15-pin
SATA power connector. The SFF-8639 port should be connected to
the NVMe SSD's U.2 port. The 15 pin SATA power connector
should be connected to the system's power supply.
3.
Insert the SSD7580A controller into one of the motherboard's open
PCI-E 4.0x16 slots.
5
Advertisement
