Springdale Lighting FTF10019 Assembly Instructions

ASSEMBLY INSTRUCTIONS:
Item No: FTF10019
1. Pull cord through base to tighten stem connections,
Be careful not to twist power cord.
2. Screw lower column onto base.
3. Screw center column onto lower column.
4. Screw upper column onto center column.
Screw lamp support arm onto upper column.
5. Pull balance of cord from base to tighten excess.
6. Unscrew shade nut from the threaded socket and place shade
over the threaded socket. Replace the shade ring and tighten, securing
the shade in place.
7. Insert bulb into the bulb socket.
Uses (1) 100Watt Maximum Type "A" Bulb
(Bulb not included)

Cleaning of your lamp.

Unplug lamp, wipe with a damp cloth. Do not use abrasives.
*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Made in China
FOR RETURN SHIPPING PURPOSES:
PLEASE RETAIN ORIGINAL PACKAGING
TO MINIMIZE DAMAGE.
Revision 03/21/11