Advertisement
Table of Contents
ASSEMBLY INSTRUCTIONS:
Item No: FTR10014
1.
Carefully unpack and lay out the parts as shown in the illustration.
2.
Pull cord through base to tighten column connections.
3.
Screw lower column into lamp base.
4.
Screw center column into lower column.
5.
Screw upper column into center column.
6.
Pull balance of cord from base to tighten excess.
7.
Unscrew the socket ring from the socket, and place the shade
into the lamp holder. Replace the socket ring onto
threaded socket to secure the shade.
8.
Insert 100Watt light bulb into bulb socket.
Uses (1) maximum 100WATT Type A Bulb.
(Bulb not Included).
Cleaning of your lamp.
Unplug lamp, wipe with a damp cloth. Do not use abrasives.
*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Made in China
FOR RETURN SHIPPING PURPOSES:
PLEASE RETAIN ORIGINAL PACKAGING
TO MINIMIZE DAMAGE.
Revision 03/22/11
Advertisement
Table of Contents
Related Manuals for Springdale Lighting FTR10014
Summary of Contents for Springdale Lighting FTR10014
- Page 1 FOR RETURN SHIPPING PURPOSES: ASSEMBLY INSTRUCTIONS: PLEASE RETAIN ORIGINAL PACKAGING TO MINIMIZE DAMAGE. Item No: FTR10014 Carefully unpack and lay out the parts as shown in the illustration. Pull cord through base to tighten column connections. Screw lower column into lamp base.
- Page 2 INSTRUCIONES DE ASAMBLEA: PARA RAZONES DE REGRASAR: POR FAVOR CONSERVE EL IMPAQUETADO ORIGINAL Modelo: FTR10014 PARA REDUCIR DAÑOS MINIMO. Desembale con cuidado y coloque las piezas como se muestra en la ilustración. Jale el cable a través de la base para ajustar las conexiones de la columna.
Need help?
Do you have a question about the FTR10014 and is the answer not in the manual?
Questions and answers