This option configures the default Power-On values, worst-case values for system performance, but are the most stable values that can be chosen. Use this option
as a diagnostic aid if the system is behaving erratically. Type Y and press <Enter> to use the Power-On defaults. The following appears:
Default values loaded. Press any key to continue.
Write to CMOS and Exit
The features selected and configured in AMIBIOS Setup are stored in CMOS RAM when this option is selected. A CMOS RAM checksum is calculated and
written to CMOS RAM. Control is then passed to the ROM BIOS.
Press N and <Enter> to return to the Main Menu. Press Y and <Enter> to save the system parameters and continue the boot process.
Do Not Write to CMOS RAM and Exit
This option passes control to the ROM BIOS without writing any changes to CMOS RAM. Press N and <Enter> to return to the Main Menu. Press Y and
<Enter> to continue the boot process without saving any system parameters.