Machine Setup - LAVAZZA EP950 Instructions Manual

EN
The company will not be responsible for any
damages in the following cases:
• incorrect use and not in conformity with the
intended purpose;
• repairs made by other than an authorised
service facility;
• tampering with the power cable;
• tampering with any part of the machine;
• use of spare parts and accessories other
than the originals;
• failure to decalcify;
• storage in a place at a temperature
below 0°C;
• use of cartridges other than those indicated.
The guarantee is no longer valid in these
cases.
MACHINE START UP
Position the machine on a flat stable surface away
from sources of water and heat. Ensure that the
machine is disconnected from power supply. Any
damages caused to the machine through failure
to follow these instructions are not covered by the
guarantee.
The lid of the water tank has a key-operated lock.
Rotate anti-clockwise to open the lid, and clock-
wise to close it.
CLOSED POSITION
The use of a water filter
(an optional accessory)
improves water quality
and prolongs machine life.
Use the AquaAroma
Crema Brita for Lavazza
filter.
In order to insert the filter,
follow the instruction
sheet which comes with
the accessory.
MACHINE SET-UP
Lift out the water tank and open the lid.
1
Fill the water tank up to the MAX level indicated
2
using only fresh, non-bubbly, drinking water.
Hot water and other liquids can damage the tank.
Do not operate the machine without water; ensure
that the water level is above the MIN indicator.
Plug in the machine and press the general
3
switch, setting it at the I position. The on-off led
will light up.
OPEN POSITION
When the coffee dispenser button lights up, the
machine is ready.
MAX
MIN