Advertisement
INTRODUCTION
Congratulations on your purchase of this Traeger Wood Pellet Grill, Model BBQ07E.
With proper set-up, operation and maintenance, the Grill will provide you with delicious food
and years of cooking enjoyment.
NOTE: NUMBERS FOLLOWING PART NAMES THROUGHOUT THIS MANUAL REFER
TO THE COMPONENT DIAGRAM.
When you un-box the Grill, remove all parts from the box and inside the Grill. Remove
any remaining packaging material from inside the Grill as well. Make sure you have, and
can identify all of the following parts:
(1) Grill (2)
(1) Hopper / Burner Assembly (31)
(2) Caster Legs (124)
(2) Wheel Legs (129)
(1) Porcelain Grill (170)
(1) Grease Drain Pan (165)
(1) Heat Baffle (162)
(1) Smoke Stack (138)
(1) Chimney Cap Assembly (140)
(1) Chrome Door Handle (168)
(1) Grease Bucket (137)
(1) Hardware Kit (150)
You will need to complete the assembly which includes:
1) Mounting the Caster Legs (124) and Wheel Legs (129) to the Grill.
2) Installing the Hopper / Burner Assembly (31).
3) Attaching the Chrome Door Handle (168) to the Door (104).
4) Attaching the Smoke Stack (138) to the Grill.
5) Mounting the Chimney Cap Assembly (140).
6) Positioning the Heat Baffle (162) over the Firepot (72).
7) Positioning the Grease Drain Pan (165) over the Heat Baffle (162).
8) Positioning the Porcelain Grill (170) on the Grill Supports.
9) Hanging the Grease Bucket (137).
TOOLS ARE SUPPLIED FOR ASSEMBLY
(2) Open end wrenches
(1) Hex key (Allen Wrench)
Follow these step-by-step instructions and you'll be cookin' in no time!
Advertisement
